Sanitary Pneumatic Tank Bottom Diaphragm Valve
| Valve body | CF8M investment casting ASTM 351 |
| Size : | 3/4″ to 4″ DN15-DN100 |
| Membrane: | PTFE+EPDM,SILICONE,EPDM.FDA certificated |
| Operations: | Manual Type,Pneumatic actuated |
| Connections: | Clamped,Butt-weld,female,male |
Working temp: EPDM(-40 ℃ ~120 ℃) PTFE(-25 ℃~180℃)
Working pressure: Max 10 Bar
Surface: internal mirror polished Ra<0.4μm External-Sand Blasted
Self-draining Angle:
When installing diaphragm valve in the horizontal pipeline, the valve should be installed at 15-30 degrees with horizontal plane, to make fluid turbulent, in order to completely evacuate the medium and to prevent dead legs.
tank bottom diaphragm valve installation